Brick Construction

Our Work

The majority of our projects consist  of Steel Beam Calculations and Structural Drawings for the removal of load-bearing walls.  We also provide a full set of structural calculations and drawings for loft conversations, single/double storey extensions, etc. 

Our extensive knowledge and years of experience in the field enables us to meet the demands and challenges of any domestic project head on.  

We endeavour to ensure that all our engineering and architectural design solutions are well-thought-out, economically sound and practical. 

Structural plans for the removal of two load-bearing walls at ground floor level
Structural plans for the removal of two load-bearing walls at ground floor level

single story rear extension and load bearing wall removal RSJ Beam calculations

Three steel beams supporting timber floors and single masonry walls at first floor level
Three steel beams supporting timber floors and single masonry walls at first floor level

Rear elevation after bi-fold doors installed. Load above new opening supported with fabricated steel
Rear elevation after bi-fold doors installed. Load above new opening supported with fabricated steel

Rear of property after bi-fold doors are installed steel beam calculations for RSL over bi-fold doors

Structural plans for the removal of two load-bearing walls at ground floor level
Structural plans for the removal of two load-bearing walls at ground floor level

single story rear extension and load bearing wall removal RSJ Beam calculations

1/6

01

Droitwich, WR9 

We were instructed to provide structural calculations and drawings  for proposed renovations to help improve our client's living space.

The works we discussed included the removal of some internal walls to open up the existing kitchen and dining area, as well as a single storey rear

extension.

 

We designed 4 RSJ's:

  • 2 beams to support the original external wall at first floor level.

  • 1 beam to add support to timber floors and masonry wall at first floor level.

  • 1 beam above proposed opening in the rear facing external wall for the installation of bi-fold doors 

02

Telford, TF3

We were instructed to provide structural calculations for a pair of steel beams to support timber floors and external cavity wall at first floor level for proposed garage conversion.

The conversion from garage to a wet room  required the removal of a load-bearing wall at ground floor level to provide internal access to the new space.

Front of property
Front of property

Ground floor wall to be removed

Load-bearing wall at ground floor level to be removed
Load-bearing wall at ground floor level to be removed

Load bearing wall to be removed

Steel beams supporting external cavity wall at first floor level
Steel beams supporting external cavity wall at first floor level

RSJ beam designed to support outer leaf brick and inner leaf block of cavity wall

Front of property
Front of property

Ground floor wall to be removed

1/4
Ground floor plan showing proposed work
Ground floor plan showing proposed work

Structural Drawings Plans for building control

Ground floor plan showing general arrangement
Ground floor plan showing general arrangement

Structural Drawings Planning Drawings Architectural Drawings Load bearing wall removal timber floor joist claculations

Steel ridge beam
Steel ridge beam

Roof for Loft Conversion

Ground floor plan showing proposed work
Ground floor plan showing proposed work

Structural Drawings Plans for building control

1/6

03

Wythall, B47

This project required a full structural design solution for proposed renovations of a large 4 bedroom property.

 

The renovations involved:

  • The removal of some internal and external load-bearing walls at ground floor level. 

  • The design of new timber floor joists at first floor level.

  • Loft conversion with the inclusion of dormers.  

 

We designed (4) RSJ's, (1) timber beam, steel beam connection and padstone details. For the loft conversion we provided new timber floors and a steel ridge beam to support the new roof arrangement. 

04

Nuneaton CV11

This project needed structural calculations and drawings for a double storey rear extension. The project required a full structural design solution for the proposed construction.

The ground floor of the extension accommodates an open concept kitchen, utility room and games room.

However, on the first floor of the extension there are three bedrooms with ensuite. We provided the following:

• Foundation design

• Structural calculations for seven steel beams

 •Two steel columns

• Timber floors and ceiling joists

• Lintels above openings in doors and windows

• Steel beam to column connection detail

AS115-21-02-A1-page-001_edited
AS115-21-02-A1-page-001_edited

AS115-21-01-A1-page-001_edited
AS115-21-01-A1-page-001_edited

AS115-21-02-A1-page-001_edited
AS115-21-02-A1-page-001_edited

1/2